Sartorius YDP 03-0CE Instruções de Operação descarregar pdf (Página 24)

Menu – Interface Settings for the Data Printer

You can prevent the settings of this menu from being

changed. To do so, enter a four-digit number (PIN num-

ber) that others cannot easily guess.

If you lose or forget this number, please contact your local

Sartorius Service Center for help.

When the printer is turned on, all settings are read into the

printer’s memory (EEPROM) and subsequently used during

the operation.

To access the menu for “Interface Settings for the Data

Printer,”

– press the key when you start the printer; or

– press the key for more than 5 seconds during

operation

The , , and keys then have

the cursor functions indicated by the corresponding

arrows.

Access to both the code and baud settings is shown in the

flow chart given as an example on the next page.

All setting options for the menu “Interface Settings for the

Data Printer” are listed following this chart.

In the “Setup” menu, you can have the menu settings

printed by pressing the key

The letter at the end of the second line indicates whether

menu settings can be changed:

C: Change: Settings can be changed

L: Locked: Settings cannot be changed

123456789012345678901234

Interface Settings

Program Vers. 1.xx C

------------------------

Baud rate 1200 bd

Parity odd

Handshake DTR/CTS

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 116 117

Sem comentários

Sartorius YDP 03-0CE Instruções de Operação Página 24